FI.130 UHKD-3 Log Carriage & FI.120 HDG-T Band Saw
Log carriage and band saw headrig for primary breakdown of logs.
Log intake to sawn lumber
Sawmill & Timber Processing Lines
Primary and secondary breakdown equipment for softwood and hardwood mills — from log handling and infeed through headrig, resaw, edging and trimming.
Overview
What this category covers
Sawmill and timber-processing machinery covers the equipment that turns logs into dimensioned lumber: log decks and infeed conveyors, debarking, primary breakdown (band or circular headrigs), secondary breakdown (resaws, edgers, gang saws), trimming and the transfers that connect each station.
Euro-Wood represents European manufacturers of this machinery to mills in the United States and Canada. Larry Lawrence works with you to define the log diet, target products and throughput, then coordinates the manufacturer's proposal, specifications and quotation.
Intended applications
- Softwood dimension lumber and studs
- Hardwood grade lumber and cants
- Small-log and short-log lines
- Resawing of cants, boards and timbers
- Edging, trimming and length optimization
- Mill modernization and single-station replacements
Equipment and features typically specified
- Log infeed, positioning and rotation systems
- Band saw and circular saw primary breakdown
- Resaws and multi-rip / gang saw units
- Edgers and trimmers with optimizing controls
- Transfers, decks and sawdust / residue handling
- Line controls and scanner integration
Technical specifications
Specification parameters
Exact figures depend on the manufacturer and model selected for your project. These are the parameters Euro-Wood confirms with the manufacturer before issuing specifications and a quotation.
| Parameter | What we confirm |
|---|---|
| Log or cant diameter range | Minimum and maximum diameter the line must accept |
| Log / cant length range | Shortest and longest pieces processed |
| Species and moisture condition | Softwood, hardwood, frozen or green logs |
| Target products | Dimensions, board thicknesses, cant sizes |
| Required throughput | Logs or cubic volume per shift |
| Saw type and kerf | Band, circular, thin-kerf and blade sizing |
| Feed speed range | Confirmed per machine and species |
| Installed power and voltage | Motors sized to the manufacturer's data; North American supply (460 V / 60 Hz typical) |
| Footprint and layout | Line length, width and required clearances |
| Controls | PLC / HMI, scanning and optimization options |
Documentation. Manufacturer brochures, technical data sheets and layout drawings for the equipment in this category are available on request. Request specifications and Larry will send the relevant documents.
Represented manufacturer
Fimaksan Sawmill Machinery
Larry Lawrence is the Fimaksan America contact for the United States, based in Damascus, Oregon. Fimaksan (Sakarya, Türkiye) has built sawmill machinery since 1970 — log carriages, band saws, multirip saws, canters and complete sawlines.
FI.150 ADM-5 Multirip Saw
Multi-blade rip saw for converting cants and flitches into boards.
FI.55 CNT-6 Canter Log Slabber
Canter / slabber for profiling logs ahead of the sawline.
Model designations and images from Fimaksan. Full technical specifications and spec sheets are available on request, and the U.S. product site is at fimaksanusa.com.
Photographs
Sawmill Lines in the plant
Representative photographs of this type of equipment and its applications. Photographs of the specific machine proposed for your project are supplied with the manufacturer's quotation.
Contact Euro-Wood
Need sawmill lines for your operation?
Tell Larry what you produce and what you need to accomplish. He will coordinate specifications, documentation and a quotation with the manufacturer.